Need Help? 1-208-365-7272 wyatt@switchviewusa.com

1650-1720 DSFD Switchview Throw Lever

(6 customer reviews)

$54.95

Our DSFD Switchview throw lever is our definition of simplification. The two-screw design increases adaptability for a more precise fit on various scope brands and models. This throw lever will fit almost any magnification ring on a scope within the size range of 1.650″ to 1.720″.

If you want a little longer top or a little shorter top, we have one hole and three hole replacements as well.  Check them our on our “lever top” page you can find here.  https://www.switchviewusa.com/product-category/lever-top/

FITS:
Burris: 
E1; TAC 30 1-4
Leupold: MK6; MK8 CQBSS 1.1-8×24
Nightforce: NXS Full-size Scopes
Shepherd: Rugged 1-8×24
Swarovski: Z5
Vortex: Strike Eagle 1-6; Viper HS w/ rubber mag ring

5 in stock (can be backordered)

Description

Our 1650-1720 DSFD Switchview throw lever is our definition of simplification. The two-screw design increases adaptability for a more precise fit on various scope brands and models. This throw lever will fit almost any magnification ring on a scope within the size range of 1.650-1.720″

We’ve integrated our new “folding” design into the 1650-1720 DSFD Switchview throw lever for several reasons.  The main reason is it won’t hang up on stuff!  Whether you’re using your rifle for hunting, competition, or work, you’ll find that the new folding design offers many benefits over our fixed levers.

We usually mount the Switchview so the lever folds back towards the rear of the gun.  This way it will fold down when you’re stuffing it into a soft case, discarding it into a dropbox in a competition or dragging it through the bushes and trees on a hunt. If you want it to be a little “stiffer” you can add a little tension to the screw that holds it in place.

Just like our entire line of standard and folding Switchview throw levers, we machine the parts out of 6061-T6 aluminum. We also hard anodize all of our aluminum products to provide you many years of “hard use” no matter what you’re doing with your gear. We’re also proud to say that 100% of the Switchview product line is manufactured in the United States of America.

If you want a little longer top or a little shorter top, we have one hole and three-hole replacements as well.  Check them our on our “lever top” page you can find here.  https://www.switchviewusa.com/product-category/lever-top/

FITS:
Burris: 
E1; TAC 30 1-4
Leupold: MK6; MK8 CQBSS 1.1-8×24
Nightforce: NXS Full-size Scopes
Shepherd: Rugged 1-8×24
Swarovski: Z5
Vortex: Strike Eagle 1-6; Viper HS w/ rubber mag ring

Additional information

Scope Diameter

, , , , , , , ,

Scope Ring Bump Height

, , , , , , , , ,

Scope Ring Bump Width-Base

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Scope Ring Bump Width-Peak

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

6 reviews for 1650-1720 DSFD Switchview Throw Lever

  1. Felix Santos Gomez (verified owner)

    Perfecto, muchísimas gracias por vuestra atención.

  2. Robert Evans (verified owner)

  3. Marc Wiesmann (verified owner)

    The perfect choice

  4. Eric (verified owner)

    Fits perfectly on my Leupold Mark 6 scope, and much better throw than the factory option that costs 3x as much as this one!

  5. Dominick D. (verified owner)

    This was to be my second switchview throw lever. I made a mistake when ordering and chose the wrong size since there were two listings for my particular scope, and after receiving the lever I realized it wasn’t large enough. I called up and described my mistake and they sent a label, I printed it, packed the lever up and shipped it. A couple days later I received the replacement lever and installed it. The other lever I’ve been using for a few years is rock solid and gets tossed in dump barrels while I’m shooting 3 gun, and it looks good as new. This lever was for a bolt action and being able to flip the lever down seemed like it would be a good feature. After installing it I definitely knew I made the right choice. There are times when you don’t need to continually adjust magnification and if you’re trying to get into and out of props, or different shooting positions, the lever could potentially snag on a prop, so flipping it down would prevent that. I also set it up so that it flips down facing me so that if I forget to flip it down and I’m entering a prop, if it were to get caught, it would just flip down. So far very happy with it. I was concerned that would be a weak point of the design, but it seems rock solid and would take a heck of a lot of force to break it off….more force than I’d ever put on it for my application. Very happy with the purchase and the customer service. Even with me being the one who made the mistake, they took care of me. You don’t find this kind of service outside the 2A community.

  6. Mitchell (verified owner)

    Works as advertised! Helps quite a bit with my arthritic ridden hands as well.

Add a review

Your email address will not be published. Required fields are marked *

Sign up for our newsletter