Need Help? 1-888-767-7371 x110 wyatt@switchviewusa.com

SV1762 Switchview

(2 customer reviews)

$59.95

Switchview USA™ Magnification Adjustment Throw Lever
1762

Fits:

  • Kahles K624i 6-24×56
  • Millett 1-4 (DMS-1) model scopes.
  • Millett 6-25×56 (LRS-1) model scopes.
  • Burris M-TAC 1-4 model scopes.
  • Horus Blackbird 1.5-8, Hawk, Talon 1-4, Predator 8-24×50 model scopes.
  • Nikon Monarch model scopes.
  • Other scopes with similar dimensions.

*Scope makers modify designs without notice. Measurement of scope magnification ring before ordering Switchview is recommended.*

Specs:

Lever length: .880”.
Ring diameter 1.762″ not including dimensions for the scope’s index nub if present.
The lever needs .256″ of clearance between the scope body and the nearest object for proper operation.
Color: Anodized Flat Black.

Switchview levers ordered in err because you measured incorrectly (or didn’t measure), can be returned but there will be a $15.00 handling fee.  If you’d like it replaced with the correct one, shipping for the new lever will also be charged.

33 in stock (can be backordered)

Description

The SV1762 Switchview throw lever is pretty much a “must have” addition to any variable powered magnified optic.  Like we’ve heard so many times before, “once you use one, you won’t be able to figure out how you ever got by without one before”!!!

Just like our entire line of standard and folding Switchview throw levers, the SV1762 Switchview throw lever is machined out of 6061-T6 aluminum.  We also hard anodize all of our aluminum products to provide you many years of “hard use” no matter what you’re doing with your gear.  We’re also proud to say that 100% of the Switchview product line is manufactured in the United States of America.

If you haven’t seen the “DSFD” (Double Screw Fold Down) version of this Switchview, you can check it out here.

Our DSFD Switchview throw lever is our definition of simplification. The two-screw design increases adaptability for a more precise fit on various scope brands and models.

We’ve integrated our new “folding” design into these new DSFD levers for several reasons.  The main reason is it won’t hang up on stuff!  Whether you’re using your rifle for hunting, competition, or work, you’ll find that the new folding design offers many benefits over our fixed levers.

We usually mount the Switchview so the lever folds back towards the rear of the gun.  This way it will fold down when you’re stuffing it into a soft case, discarding it into a drop box in a competition or dragging it through the bushes and trees on a hunt. If you want it to be a little “stiffer” you can add a little tension to the screw that holds it in place.

If you want a little longer top or a little shorter top, we have one hole and three hole replacements as well.  Check them our on our “lever top” page you can find here.  https://www.switchviewusa.com/product-category/lever-top/

This Switchview throw lever fits scopes such as:

  • Kahles K624i 6-24×56
  • Millett 1-4 (DMS-1) model scopes.
  • Millett 6-25×56 (LRS-1) model scopes.
  • Burris M-TAC 1-4 model scopes.
  • Horus Blackbird 1.5-8, Hawk, Talon 1-4, Predator 8-24×50 model scopes.
  • Nikon Monarch model scopes.
  • Other scopes with similar dimensions.

*Scope makers modify designs without notice. Measurement of scope magnification ring before ordering Switchview is recommended.*

Specs:

Lever length: .880”.
Ring diameter 1.762″ not including dimensions for the scope’s index nub if present.
The lever needs .256″ of clearance between the scope body and the nearest object for proper operation.
Color: Anodized Flat Black.

Switchview levers ordered in err because you measured incorrectly (or didn’t measure), can be returned but there will be a $15.00 handling fee.  If you’d like it replaced with the correct one, shipping for the new lever will also be charged.

Additional information

Scope Ring Bump Height

, , , , , , , , , , , , , , , , , ,

Scope Ring Bump Width-Base

, , , , , , , , , , , , , , , , , , , , , , , , , , ,

Scope Ring Bump Width-Peak

, , , , , , , , , , , , , , , , , ,

Scope Diameter

, , , ,

2 reviews for SV1762 Switchview

  1. TODD A. (verified owner)

    works great

  2. Thomas James (verified owner)

    The SV lever is awesome I own 4 of them now. The only issue I have with my most recent purchase was an error on my part. I ordered the SV-1762 because upon measuring my mag ring 1.762 was its max dia. I did not pay attention to the fact that the model I ordered has the cut out for a “nub”. My scope doesn’t have this feature so when I look at my lever it sets my “OCD” off every time. Otherwise the lever works just fine and is excellent quality just like all my other SV Levers.
    Just aggravates me anytime I look at it closely!!

Add a review

Your email address will not be published. Required fields are marked *

You may also like…

Sign up for our newsletter