Need Help? 1-888-767-7371 x110 wyatt@switchviewusa.com
Sale!

1819-1870 DSFD Switchview throw lever

(14 customer reviews)

$64.95 $54.95

Our DSFD Switchview throw lever is our definition of simplification. The two-screw design increases adaptability for a more precise fit on various scope brands and models. This throw lever will fit almost any magnification ring on a scope within the size range of 1.819″ to 1.870″.

If you want a little longer top or a little shorter top, we have one hole and three hole replacements as well.  Check them our on our “lever top” page you can find https://www.switchviewusa.com/product-category/lever-top/.

FITS:
Burris: M-TAC 1-6; ZRS 4.5-30
Bushnell: Elite Tactical XRS 4.5-30×50; HDMR 3.5-21
Nightforce: ATACR
Premier: Heritage Scopes 3.5-15 and 5-25
Sig Sauer: Tango 4; Whiskey 5
Swarovski: x5; Z6i 1-6; Z8i
Tangent Theta: 5-25×56 TT525P, 3-15×50 TT315P, 3-15×50 TT315M
Vortex: Razor HD AMG; Viper PST Gen II

26 in stock (can be backordered)

Description

Our 1819-1870 DSFD Switchview throw lever is our definition of simplification. The two-screw design increases adaptability for a more precise fit on various scope brands and models. This throw lever will fit almost any magnification ring on a scope within the size range of 1.819-1.870″

We’ve integrated our new “folding” design into the 1819-1870 DSFD Switchview throw lever for several reasons.  The main reason is it won’t hang up on stuff!  Whether you’re using your rifle for hunting, competition, or work, you’ll find that the new folding design offers many benefits over our fixed levers.

We usually mount the Switchview so the lever folds back towards the rear of the gun.  This way it will fold down when you’re stuffing it into a soft case, discarding it into a drop box in a competition or dragging it through the bushes and trees on a hunt. If you want it to be a little “stiffer” you can add a little tension to the screw that holds it in place.

Just like our entire line of standard and folding Switchview throw levers, we machine the parts out of 6061-T6 aluminum. We also hard anodize all of our aluminum products to provide you many years of “hard use” no matter what you’re doing with your gear. We’re also proud to say that 100% of the Switchview product line is manufactured in the United States of America.

If you want a little longer top or a little shorter top, we have one hole and three hole replacements as well.  Check them our on our “lever top” page you can find here.  https://www.switchviewusa.com/product-category/lever-top/

 

FITS:
Burris: M-TAC 1-6; ZRS 4.5-30
Bushnell: Elite Tactical XRS 4.5-30×50; HDMR 3.5-21
Nightforce: ATACR
Premier: Heritage Scopes 3.5-15 and 5-25
Sig Sauer: Tango 4; Whiskey 5
Swarovski: x5; Z6i 1-6; Z8i
Tangent Theta: 5-25×56 TT525P, 3-15×50 TT315P, 3-15×50 TT315M
Vortex: Razor HD AMG; Viper PST Gen II

Additional information

Scope Diameter

, , , , , , ,

Scope Ring Bump Height

, , , , , , , , , , , , , , , , , ,

Scope Ring Bump Width-Base

, , , , , , , , , , , , , , , , , ,

Scope Ring Bump Width-Peak

, , , , , , , , ,

14 reviews for 1819-1870 DSFD Switchview throw lever

  1. Eric (verified owner)

    I installed these on both of my 7-35 ATACR scopes and really like the versatility of these over the stock “nub” that is included. While the lever is deployed you have much greater leverage and purchase than the nub but when you are wanting a snag free solution you simply fold it down and do not have to worry about. I have owned several Switchview levers and through hunting and competition I have never had one break or let me down in the moment.

  2. Ernan (verified owner)

    Very nice part. Nicely machined without sharp edges. Petfect fit. Will buy more

  3. Anonymous (verified owner)

    Brief delay before shipping, O/W good service, product as expected.

  4. Lance K. (verified owner)

    This is on a Tangent Theta TT315M. While it does fit and works fine, there is a decent gap on both sides of the mounting screws from the ring to the lever. I think maybe the next size up might fit better.

    The folding lever is a nice feature though, especially since this rifle will see quite a bit of backpack scabbard time. Material quality and machining are excellent.

  5. Anonymous (verified owner)

    Absolutely essential for my scope. Sturdy construction and relatively low profile; it does not interfere with seeing the scope level.

  6. Charles Brinkman (verified owner)

    Great device and great service!

  7. david z. (verified owner)

    Top notch. Don’t buy a knockoff

  8. Gary M. (verified owner)

    I have a fixed switch view on a 3-15 optic, and decided to pick up another one for the same brand of optic on another weapon.. I purchased the retractable handle.. I love it.. I may have to buy another one to replace my existing fixed handle.. fast shipping excellent product..

    Gary M

  9. Paul (verified owner)

    great product, fast shipping, I’m a happy camper

  10. Jeremy Potter (verified owner)

    Great product! Customer service equally as great!

  11. John Stewart (verified owner)

    I have many Switchview throw levers for different scopes, and they have never let me down. They are a high quality product that makes changing magnification power quick and sure. When I made my latest purchase for a Tangent Theta scope, I wasn’t sure if I’d need longer screws, and they were included without question.

  12. Aaron Davila (verified owner)

  13. John S. (verified owner)

    Dealing with Switchview is always completely satisfying. The products and service are first-rate. Highly recommended.

  14. ed W. (verified owner)

    Outstanding customer service. Friendly people. I would definitely do business with these people again.

Add a review

Your email address will not be published. Required fields are marked *

You may also like…

Sign up for our newsletter