Need Help? 1-888-767-7371 x110 wyatt@switchviewusa.com

SV1811 Switchview throw lever

(2 customer reviews)

$59.95

Switchview USA™ Magnification Adjustment Throw Lever
1811

Fits:

  • Vortex Viper PST Gen II
  • Other scopes with similar dimensions.

*Scope makers modify designs without notice. Measurement of scope magnification ring before ordering Switchview is recommended.*

Specs:

Lever length: .880”.
Ring diameter 1.811″ round – NOTE, fits only on round scope rings with no index bump/knob.
The lever needs .125″ of clearance between the scope body and the nearest object for proper operation.
Color: Anodized Flat Black.

Switchview levers ordered in err because you measured incorrectly (or didn’t measure), can be returned but there will be a $15.00 handling fee.  If you’d like it replaced with the correct one, shipping for the new lever will also be charged.

23 in stock (can be backordered)

Description

The SV1811 Switchview throw lever is pretty much a “must have” addition to any variable powered magnified optic.  Like we’ve heard so many times before, “once you use one, you won’t be able to figure out how you ever got by without one before”!!!

Just like our entire line of standard and folding Switchview throw levers, the SV1811 Switchview throw lever is machined out of 6061-T6 aluminum.  We also hard anodize all of our aluminum products to provide you many years of “hard use” no matter what you’re doing with your gear.  We’re also proud to say that 100% of the Switchview product line is manufactured in the United States of America.

If you haven’t seen the “DSFD” (Double Screw Fold Down) version of this Switchview, you can check it out here.

Our DSFD Switchview throw lever is our definition of simplification. The two-screw design increases adaptability for a more precise fit on various scope brands and models.

We’ve integrated our new “folding” design into these new DSFD levers for several reasons.  The main reason is it won’t hang up on stuff!  Whether you’re using your rifle for hunting, competition, or work, you’ll find that the new folding design offers many benefits over our fixed levers.

We usually mount the Switchview so the lever folds back towards the rear of the gun.  This way it will fold down when you’re stuffing it into a soft case, discarding it into a drop box in a competition or dragging it through the bushes and trees on a hunt. If you want it to be a little “stiffer” you can add a little tension to the screw that holds it in place.

If you want a little longer top or a little shorter top, we have one hole and three hole replacements as well.  Check them our on our “lever top” page you can find here.  https://www.switchviewusa.com/product-category/lever-top/

Fits:
Vortex – Viper PST Gen II 
Other scopes with similar dimensions.

Fits scope magnification rings with an outside diameter of 1.811″ plus/minus .02″ with no indexing bump.

Specs: Lever length: .880”.

Ring diameter 1.811″ round – NOTE, fits only on round scope rings with no index bump/knob.

The lever needs .125″ of clearance between the scope body and the nearest object for proper operation.

Color: Anodized Flat Black.

Additional information

Scope Ring Bump Height

Scope Ring Bump Width-Base

Scope Ring Bump Width-Peak

Scope Diameter

2 reviews for SV1811 Switchview throw lever

  1. Michael Z. (verified owner)

    This model fit perfectly on my Vortex Razor HD AMG

  2. bill (verified owner)

    Y’all have done well!

Add a review

Your email address will not be published. Required fields are marked *

You may also like…

Sign up for our newsletter