Need Help? 1-208-869-6597 wyatt@switchviewusa.com

SV182-187 Switchview Throw Lever

$59.95

Switchview USA™ Magnification Adjustment Throw Lever
182-187

This Switchview throw lever fits scopes such as:

  • Premier Heritage Scopes – 5-25, 3.5-15
  • Other scopes with similar dimensions.

*Scope makers modify designs without notice. Measurement of scope magnification ring before ordering Switchview is recommended.*

Specs:

Lever length: .880”.
Ring diameter: Variable – 1.820 – 1.870″ round – NOTE, fits only on round scope rings with no index bump/knob.
Color: Anodized Flat Black.

Switchview levers ordered in error because you measured incorrectly (or didn’t measure), can be returned but there will be a $15.00 handling fee.  If you’d like it replaced with the correct one, shipping for the new lever will also be charged.

56 in stock (can be backordered)

Description

The SV182-187 Switchview throw lever is pretty much a “must-have” addition to any variable powered magnified optic.  We’ve heard customers say it many times before…” once you use one, you won’t be able to figure out how you ever shot without one before”!!!

Just like our entire line of standard and folding Switchview throw levers, we machine our SV182-187 Switchview throw lever is out of 6061-T6 aluminum.  We also hard anodize all of our aluminum products to provide you many years of “hard use” no matter what you’re doing with your gear.  We’re also proud to say that 100% of the Switchview product line is manufactured in the United States of America.

If you haven’t seen the “DSFD” (Double Screw Fold Down) version of this Switchview, you can check it out here.

Our DSFD Switchview throw lever is our definition of simplification. The two-screw design increases adaptability for a more precise fit on various scope brands and models.

We’ve integrated our new “folding” design into these new DSFD levers for several reasons.  The main reason is it won’t hang up on stuff!  Whether you’re using your rifle for hunting, competition, or work, you’ll find that the new folding design offers many benefits over our fixed levers.

We usually mount the Switchview so the lever folds back towards the rear of the gun.  This way it will fold down when you’re stuffing it into a soft case, discarding it into a dropbox in a competition, or dragging it through the bushes and trees on a hunt. If you want it to be a little “stiffer” you can add a little tension to the screw that holds it in place.

If you want a little longer top or a little shorter top, we have one hole and three-hole replacements as well.  Check them out on our “lever top” page you can find here.  https://www.switchviewusa.com/product-category/lever-top/

This Switchview throw lever fits scopes such as:

  • Premier Heritage Scopes – 5-25, 3.5-15
  • Other scopes with similar dimensions.

*Scope makers modify designs without notice. Measurement of scope magnification ring before ordering Switchview is recommended.*

Specs:

Lever length: .880”.
Ring diameter: Variable – 1.820 – 1.870″ round – NOTE, fits only on round scope rings with no index bump/knob.
Color: Anodized Flat Black.

Switchview levers ordered in err because you measured incorrectly (or didn’t measure), can be returned but there will be a $15.00 handling fee.  If you’d like it replaced with the correct one, shipping for the new lever will also be charged.

Additional information

Scope Ring Bump Height

Scope Ring Bump Width-Base

Scope Ring Bump Width-Peak

Scope Diameter

, , , , , ,

Reviews

There are no reviews yet

Be the first to review “SV182-187 Switchview Throw Lever”

Your email address will not be published. Required fields are marked *

You may also like…

Sign up for our newsletter