Description
The SV1819 Switchview throw lever is pretty much a “must-have” addition to any variable powered magnified optic. We’ve heard customers say it many times before…”once you use one, you won’t be able to figure out how you ever shot without one before”!!!
Just like our entire line of standard and folding Switchview throw levers, we machine our SV1819 Switchview throw lever is out of 6061-T6 aluminum. We also hard anodize all of our aluminum products to provide you many years of “hard use” no matter what you’re doing with your gear. We’re also proud to say that 100% of the Switchview product line is manufactured in the United States of America.
If you haven’t seen the “DSFD” (Double Screw Fold Down) version of this Switchview, you can check it out here.
Our DSFD Switchview throw lever is our definition of simplification. The two-screw design increases adaptability for a more precise fit on various scope brands and models.
We’ve integrated our new “folding” design into these new DSFD levers for several reasons. The main reason is it won’t hang up on stuff! Whether you’re using your rifle for hunting, competition, or work, you’ll find that the new folding design offers many benefits over our fixed levers.
We usually mount the Switchview so the lever folds back towards the rear of the gun. This way it will fold down when you’re stuffing it into a soft case, discarding it into a drop box in a competition or dragging it through the bushes and trees on a hunt. If you want it to be a little “stiffer” you can add a little tension to the screw that holds it in place.
If you want a little longer top or a little shorter top, we have one hole and three hole replacements as well. Check them our on our “lever top” page you can find here. https://www.switchviewusa.com/product-category/lever-top/
This Switchview throw lever fits scopes such as:
- Bushnell HDMR 3.5-21,
- Bushnell Elite Tactical XRS 4.5-30X50,
- Burris M-Tac 1-6.
- Tangent Theta: 5-25×56 TT525P, 3-15×50 TT315P, 3-15×50 TT315M – requires longer screw, please note in order comments.
- Other scopes with similar dimensions.
*Scope makers modify designs without notice. Measurement of scope magnification ring before ordering Switchview is recommended.*
Specs:
Lever length: .880”.
Ring diameter 1.819″ not including dimensions for the scope’s index nub if present.
The lever needs .125″ of clearance between the scope body and the nearest object for proper operation.
Color: Anodized Flat Black.
DOUG MOORE (verified owner) –
Doesn’t fit the tangent like advertised
Jessica B –
Hello, Doug! Have you contacted one of our CSR to obtain a longer screw? This specific model does fit the Tanget Theta but requires a longer screw, per our scope compatibility table. We will also update the product listing to reflect this requirement. Please contact jessica@switchviewusa.com and we will get one sent your way ASAP.
Thank you,
Switchview USA
Sean Nelson (verified owner) –
Looks good, works good. Love it.
Cody S. (verified owner) –
Excellent Quality, Great Service
Michael May (verified owner) –
I have exactly the same Problem like Doug Moore,
so Switchview team why do not you just put both screws in the pack?
Otherwise, the workmanship and design is top.
Best Regards
Micha
Michael May (verified owner) –
For all User that make the same Mistake, it’s a 2-56 UNC x 3/4″ or Longer Screw for Tangent Theta
Thx to Jessica for the fast Awnser
BR
Micha
Jeffrey B. (verified owner) –
The switch view works great. Very solid, no play. I have 11 scopes with them on.
Jordan (verified owner) –
Mine was for a SB PMII 3-20. Need the longer screw.
Lee (verified owner) –
Austin (verified owner) –
Made with great quality. Unfortunately it didn’t fit over the Scope bump into Sig Tango4. It was too narrow. Would buy again if the notch width is increased to fit new dimensions for Sig Tango4 scopes
Eric (verified owner) –
It fits the Bushnell Elite Tactical XRS 4.5-30X50 (Circa 2016-2017). Not sure if Bushnell changed the magnification ring, but it does fit mine. Don’t crank down on the small screw. I added a touch of Blue Loctite to make sure. The Switchview does fit the larger ‘bump’ on the magnification ring, and ‘sits’ on top of the smaller ‘bumps’ around the circumference. It works so far so good. The Bushnell mag ring is a little stiff, so this makes it easier to switch magnification.
Anonymous (verified owner) –
Just what I needed. Shipping was extremely fast. Thanks Guys.
Kenneth M. (verified owner) –
This lever shows great craftsmanship and fit my Bushnell DMR perfectly.
Installation took me all of 3 minutes and offers much easier operation of the magnification ring which was a bit stiff on my scope.
The lever height is about perfect and all the edges are nicely radiused.
This was a great addition to my scope.
Highly recommended.
Tyler (verified owner) –
Needed extra long screws to fit my scope. Great service
Edward (verified owner) –
Shoutout to the guys at Switchview; they really took care of me! I have a scope that didn’t come with a matching throw lever. I did a search and at first found only nylon throw levers that were printed on a 3D printer. I have one of these things and have found it to be too bulky to be usable. I discovered that Switchview makes an aluminum lever that fits my scope. Sure enough, the product slipped over my power ring (with some coaxing) as advertised and now I can easily adjust the magnification on the range. Thanks guys!