Need Help? 1-888-767-7371 x110 wyatt@switchviewusa.com

SV1762 Switchview throw lever

(2 customer reviews)

$59.95

Switchview USA™ Magnification Adjustment Throw Lever
1762

Fits:

  • Kahles K624i 6-24×56
  • Millett 1-4 (DMS-1) model scopes.
  • Millett 6-25×56 (LRS-1) model scopes.
  • Burris M-TAC 1-4 model scopes.
  • Horus Blackbird 1.5-8, Hawk, Talon 1-4, Predator 8-24×50 model scopes.
  • Nikon Monarch model scopes.
  • Other scopes with similar dimensions.

*Scope makers modify designs without notice. Measurement of scope magnification ring before ordering Switchview is recommended.*

Specs:

Lever length: .880”.
Ring diameter 1.762″ not including dimensions for the scope’s index nub if present.
The lever needs .256″ of clearance between the scope body and the nearest object for proper operation.
Color: Anodized Flat Black.

Switchview levers ordered in err because you measured incorrectly (or didn’t measure), can be returned but there will be a $15.00 handling fee.  If you’d like it replaced with the correct one, shipping for the new lever will also be charged.

50 in stock (can be backordered)

Description

Switchview USA™ Magnification Adjustment Throw Lever
1762

This Switchview throw lever fits scopes such as:

  • Kahles K624i 6-24×56
  • Millett 1-4 (DMS-1) model scopes.
  • Millett 6-25×56 (LRS-1) model scopes.
  • Burris M-TAC 1-4 model scopes.
  • Horus Blackbird 1.5-8, Hawk, Talon 1-4, Predator 8-24×50 model scopes.
  • Nikon Monarch model scopes.
  • Other scopes with similar dimensions.

*Scope makers modify designs without notice. Measurement of scope magnification ring before ordering Switchview is recommended.*

Specs:

Lever length: .880”.
Ring diameter 1.762″ not including dimensions for the scope’s index nub if present.
The lever needs .256″ of clearance between the scope body and the nearest object for proper operation.
Color: Anodized Flat Black.

Switchview levers ordered in err because you measured incorrectly (or didn’t measure), can be returned but there will be a $15.00 handling fee.  If you’d like it replaced with the correct one, shipping for the new lever will also be charged.

Additional information

Scope Ring Bump Height

, , , , , , , , , , , , , , , , , ,

Scope Ring Bump Width-Base

, , , , , , , , , , , , , , , , , , , , , , , , , , ,

Scope Ring Bump Width-Peak

, , , , , , , , , , , , , , , , , ,

Scope Diameter

, , , ,

2 reviews for SV1762 Switchview throw lever

  1. TODD A. (verified owner)

    works great

  2. Thomas James (verified owner)

    The SV lever is awesome I own 4 of them now. The only issue I have with my most recent purchase was an error on my part. I ordered the SV-1762 because upon measuring my mag ring 1.762 was its max dia. I did not pay attention to the fact that the model I ordered has the cut out for a “nub”. My scope doesn’t have this feature so when I look at my lever it sets my “OCD” off every time. Otherwise the lever works just fine and is excellent quality just like all my other SV Levers.
    Just aggravates me anytime I look at it closely!!

Add a review

Your email address will not be published. Required fields are marked *

You may also like…

Sign up for our newsletter