Need Help? 1-208-869-6597 wyatt@switchviewusa.com

SV167-171 Switchview Throw Lever

(11 customer reviews)

$59.95

Switchview USA™ Magnification Adjustment Throw Lever
167-171

This Switchview throw lever fits scopes such as:

  • Burris E1, TAC-30 1-4
  • Leupold MK6
  • Leupold MK8 1.1-8
  • Nightforce NXS full size scopes except the ATACR 5-25
  • Vortex Viper PST riflescopes with rubber magnification rings,
  • Viper HS riflescopes with rubber magnification rings,
  • Other scopes with similar dimensions.

*Scope makers modify designs without notice. Measurement of scope magnification ring before ordering Switchview is recommended.*

Specs:

Lever length: .880”.
Ring diameter: Variable – 1.670 – 1.710″ round – NOTE, fits only on round scope rings with no index bump/knob.
Color: Anodized Flat Black.

Switchview levers ordered in err because you measured incorrectly (or didn’t measure), can be returned but there will be a $15.00 handling fee.  If you’d like it replaced with the correct one, shipping for the new lever will also be charged.

Available on backorder

Description

The SV167-171 Switchview throw lever is pretty much a “must have” addition to any variable powered magnified optic.  We’ve heard customers say it many times before…”once you use one, you won’t be able to figure out how you ever shot without one before”!!!

Just like our entire line of standard and folding Switchview throw levers, we machine our SV167-171 Switchview throw lever is out of 6061-T6 aluminum.  We also hard anodize all of our aluminum products to provide you many years of “hard use” no matter what you’re doing with your gear.  We’re also proud to say that 100% of the Switchview product line is manufactured in the United States of America.

If you haven’t seen the “DSFD” (Double Screw Fold Down) version of this Switchview, you can check it out here.

Our DSFD Switchview throw lever is our definition of simplification. The two-screw design increases adaptability for a more precise fit on various scope brands and models.

We’ve integrated our new “folding” design into these new DSFD levers for several reasons.  The main reason is it won’t hang up on stuff!  Whether you’re using your rifle for hunting, competition, or work, you’ll find that the new folding design offers many benefits over our fixed levers.

We usually mount the Switchview so the lever folds back towards the rear of the gun.  This way it will fold down when you’re stuffing it into a soft case, discarding it into a drop box in a competition or dragging it through the bushes and trees on a hunt. If you want it to be a little “stiffer” you can add a little tension to the screw that holds it in place.

If you want a little longer top or a little shorter top, we have one hole and three-hole replacements as well.  Check them our on our “lever top” page you can find here.  https://www.switchviewusa.com/product-category/lever-top/

This Switchview throw lever fits scopes such as:

  • Burris E1, TAC-30 1-4
  • Leupold MK6
  • Leupold MK8 1.1-8
  • Nightforce NXS full size scopes except the ATACR 5-25
  • Vortex Viper PST riflescopes with rubber magnification rings,
  • Viper HS riflescopes with rubber magnification rings,
  • Other scopes with similar dimensions.

*Scope makers modify designs without notice. Measurement of scope magnification ring before ordering Switchview is recommended.*

Specs:

Lever length: .880”.
Ring diameter: Variable – 1.670 – 1.710″ round – NOTE, fits only on round scope rings with no index bump/knob.
Color: Anodized Flat Black.

Switchview levers ordered in err because you measured incorrectly (or didn’t measure), can be returned but there will be a $15.00 handling fee.  If you’d like it replaced with the correct one, shipping for the new lever will also be charged.

Additional information

Scope Ring Bump Height

Scope Ring Bump Width-Base

Scope Ring Bump Width-Peak

Scope Diameter

, , , ,

11 reviews for SV167-171 Switchview Throw Lever

  1. Eric

    I bought this for my Leupold Mark 6 1-6 scope and it fits perfectly. I have a Leupold brand lever for my 3-18 model that I paid 2x more than the switchview AND it has play in it! The switchview is easier to mount and lets you move the lever to fit your need. The switchview lever also has more surface area than the OEM Leupold option.

  2. Frank (verified owner)

    This is one of those game changers that most people don’t think about. If you have a variable power optic and spend time behind it, this is a must have. I was a skeptic the first time someone recommended I get one. Today, I won’t buy a riflescope unless a SwitchView is made for it. (Or, at least MGM commits to making one for it.) I have one on every optic I use. Accept no substitutes. Get the real deal from the original engineers that designed it. It will change your life.

  3. Leon G. (verified owner)

    Excellent quality and perfect fit onto my Primary Arms scope.

  4. Carson C. (verified owner)

    This is my 3rd one I purchased. Quality produce.

  5. Wyatt L. (verified owner)

    Very good product, quick to install, does exactly what I need it to do.

  6. Robert L. (verified owner)

    I like there website and same day service.
    Thanks Switchview !!

  7. Anonymous (verified owner)

  8. Wade Stockton (verified owner)

    Switchview delivered fast for a Nightforce NXS and I couldn’t be happier. Way to go Switchview and MGM. Your products and service are always topnotch. Thank you Wyatt.

  9. Philip P. (verified owner)

    Fits the Leupold Mark 6 scope perfectly .

  10. Danny Ratliff (verified owner)

    Awesome fit and finish

  11. Danny (verified owner)

    i don’t have the lever yet

Add a review

Your email address will not be published. Required fields are marked *

You may also like…

Sign up for our newsletter